Related Products
Available at :
|
Innovation |
|
|
For example, Channel A could have Pink Noise or a sine wave, and Channel B program material. Select either Input A or B and just toggle between the two. Interlocking switches prevent more than one Input being selected at a time. Interlocking switches also prevent more than one Output pair being selected at a time, so that each Output pair can be stepped through by pressing the subsequent switch. A status LED shows which output is currently active. All Inputs and Outputs are electronically balanced on Tip-Ring-Sleeve jack connectors, and Loop outputs allow the Input signals to be looped to additional iSwitch units, for larger testing arrays to be set up. Superb Audio Quality The unique ARX iSwitch provides a truly innovative solution to testing multiple powered speaker systems. Every day, ARX Audio interface products solve audio problems for thousands of people around the world. |
|
Gain Off to +6dB
Input A and B Impedance 40 KOhm
Input Headroom +21dB
Outputs 1–16 Impedance 100 Ohm
Output Level (Max) +26dB
Frequency Response 10Hz – 20KHz ±0.25 dB
Signal to Noise ratio –96dB Unweighted, –102dB ‘A’ weighted
Distortion @ Unity Gain .0025% THD, 0dB @ 1 KHz
Dynamic Range 122 dB
Input Connectors Balanced Tip-Ring-Sleeve jack, wired Tip +, Ring –, Sleeve Audio Earth/Ground
Output Connectors Balanced Tip-Ring-Sleeve jack, wired Tip +, Ring –, Sleeve Audio Earth/Ground
Staus Indicators Input A or B LEDs, Outputs 1–16 LEDs
Power Requirements 100-120/220-240 V AC, 50/60 Hz, 8VA (8 watts) on 3 pin IEC connector
Weight 5 lbs/2.2 Kg
Dimensions 19"W x 1¾"H x 6"D, 482 x 44 x 155mm
